After days of teamwork, 4 sets of CNC press brakes (1 each of WE67K-100/2500, WE67K-100/3200, WE67K-125/3200 and WG67K-63/2200) have passed the tests of 10 core indexes, such as dimensional accuracy and hydraulic stability. All types of equipment are packed with moisture-proof film winding + ISO certified wooden box reinforcement to ensure the safety of transnational transportation. Container shipment is expected to start within 48 hours, and logistics information will be pushed to the customer’s system in real time. This batch of equipments will be specially used for upgrading the production line of new energy vehicle battery shells, which will help the customer’s production capacity to climb up the slope by improving the bending and molding efficiency by 30%, thanks to the efficient implementation of the team and the depth of customer synergy, we will implement the whole logistic tracking until the accurate delivery of the equipments.
Early this morning, the 40HQ container (shipped from Shijiazhuang, Hebei Province) arrived at our factory on time after a long night’s journey. After the truck drove into the loading workshop, the driver immediately got off the truck to perform the initial inspection of the container status, taking pictures of the bottom beam structure, the inside of the empty box and the panoramic view of the floor, etc. The inside of the box was well-lit, and there was no trace of deformation on the wall of the box, which was in line with the requirements for the loading of precision equipment.
Weight Deviation Range
Horizontal weight deviation: The weight difference between the left and right sides shall not exceed 2.5% of the total weight of the container (based on the “GB18564.1-2003” standard).
Longitudinal weight deviation: The weight difference between the front and rear is generally not more than 5% of the total weight (some railroads require more stringent requirements, such as not more than 4 tons).
Therefore, the plan is to put 2.5 meters and 2.2 meters press brake on both ends of the container, the middle put 3.2 meters of the two, the middle of that WE67K-125/3200 press brake with WG67K-63/2200 press brake in close proximity to the location to balance the important deviations, the first one into the WE67K-100/2500 electro-hydraulic servo numerical control press brake, in the forklift boosted With the help of forklift, the press brake was easily entered and placed on the right side of the machine box.
Under the on-site supervision of the engineers, the worker team strictly followed the loading plan and ensured a balanced distribution of the center of gravity of the four press brakes (including WE67K-100/3200 and other models with different tonnages) through precise shifting and multi-point fixing of the forklift trucks and at the same time, adopted the non-slip steel plate and anti-tilting block to achieve the buffer of stress between the equipment and the box body.
The first one is the WE67K-100/2500 electro-hydraulic servo CNC press brake. The press brake is easy to enter with the help of a forklift and is placed on the right side of the machine box.


The second cabinet is WE67K-100/3200 electro-hydraulic servo CNC press brake, because this press brake with DSP photoelectric protection, machine height is slightly higher than the previous one, carefully pushed into the machine tool box, the DSP photoelectric protection of the side of the removal of the binding in the throat of the press brake, to solve the overall length of the machine does not exceed the length of the problem; the second placed in the direction of the first one is the opposite, so as to save space.

Followed by the third press brake, also easily into the box, the direction of the third and the second unit of the opposite direction, also cross placed, by the right side of the orderly placement. placement, but also intentionally as close as possible to the right side of the box.

Finally came in the fourth press brake, the WG67K-63/2200 high-efficiency type. The weight of this unit is obviously lighter than the previous three, so was machine tool accessories and sheet metal are also placed in front of this press brake, increasing the weight of the box doorway.

Equipment Reinforcement
After an hour of efficient collaboration, four bending machines accurately fit into the box, the team immediately into the more critical equipment reinforcement. Four machines need to be cross-anchored by 12 8mm-diameter galvanized steel wire ropes, each set of equipment in the chassis, waist and top of the three binding nodes were set up, the workers in the interior of the container is only 0.5 meters wide gap between the work of bending, the use of ratcheting locking buckle on each steel wire to apply the pre-tensioning force, during the period of three times using a tension detector calibration (threshold value of ≥ 500kg/root), and in the steel wire and the equipment prongs of the contact with the installation of anti-wear rubber sleeve The contact between the wire and the corners of the equipment is equipped with a rubber sleeve to prevent wear and tear. After two hours and fifteen minutes of delicate operation, the maximum displacement between the equipment and the box was finally realized to be controlled within 3mm, which is in full compliance with the standard of anti-slipping of marine transportation. At this moment, the work clothes on the backs of the workers have long been soaked with sweat, and the worn gloves in their hands have become the medals of this silent battle.



Finally, according to the normal order of container loading, the loading operation is completed, lifted and loaded onto the truck for shipment!
From the order confirmation to the container shipment, Anhui Haili Machine Tool Manufacturing Company completed the whole process of customized production, multi-level quality inspection and cross-border shipment of the four press brakes in 20 days with extremely fast response. During the order execution period, the technical team completed the drawing adaptation and process parameter locking within 72 hours, and the production workshop relayed the operation to ensure that the machining accuracy of key components of core models such as WE67K-100/3200 reaches ±03mm; the QC center tested the hydraulic system, and the servo response speed was calibrated to milliseconds; the logistics team synchronized the customized moisture-resistant and anti-seismic packaging solutions, and passed 12 ISTA transportation simulation certifications. The logistics team customized the moisture-proof and shock-proof packaging solution and passed 12 ISTA transportation simulation certifications. Finally, the four press brakes were sealed and loaded at 11:00 a.m. today and shipped to the customer’s factory in Baisla. 20 days of dedication carries Haili people’s persistence in “China’s Smart Manufacturing”, and it also carries the strategic vision of expanding the new energy market in Europe together with our partners.


