Regarding the two key parameters of the press brake machine: maximum opening height and maximum stroke, what do they stand for? And what are their significance? Before buying a press brake, it is very important to understand these parameters, which will help you choose the equipment that best meets your needs. Here are their specific meanings and functions:

1. The Maximum Opening Height
The maximum opening height of the press brake (also known as the opening height) is one of the important parameters of the equipment, referring to the vertical distance from the table surface to the lower surface of the slider when the slider is located in the upper dead center.

This parameter directly affects the maximum machinable height of the workpiece and the installation space of the mold. Specifically, the maximum opening height includes the following components:
- Quick Clamp
- Upper mold
- Lower mold
- Cylinder stroke
2. The size of the maximum opening height is usually related to the model of the press brake.
2.1 Small press brake:
Usually the maximum opening height is 100-300mm, suitable for thin plates or small workpieces. For example, 40/1600 press brake related parameters are as follows:
- Upper mold: 90mm
- Quick clamp: 80mm
- Lower mold: 50mm
- Cylinder stroke: 80mm
Adding these values: 90 + 80 + 50 + 80 = 300mm, this is the theoretical maximum opening height of the model. However, the cylinder stroke is usually not fully accounted for in the maximum opening height, because the cylinder is pressed down to the lower limit position, which is an unreasonable action. To protect the cylinder, it is generally necessary to retain part of the stroke distance.
Therefore, for equipment similar to the 40/1600 press brake, it would be more reasonable to design the maximum opening height as 280mm.

2.2 Medium-sized press brake:
The maximum opening height is usually 300-600mm, which is common in general-purpose processing scenarios and is the most widely used press brake model. The majority of press brakes have a maximum opening height within this range.
For example, the relevant parameters of WE67K-100/3200 electro-hydraulic press brake are:
- Quick clamp: 100mm
- Upper mold: 120mm
- Lower mold: 46mm
- Die holder: 55mm
- Die bar: 10mm
- Stroke: 200mm
The above parameters add up to 100 + 120 + 46 + 55 + 10 + 200 = 531mm, however, to ensure the stability and durability of the machine, it is more reasonable to design the maximum opening height as 500mm.
2.3 Large/heavy press brake:
The maximum opening height can be more than 600mm or even more than 1000mm, mainly used for processing thick plates or special structural parts. These machines are usually equipped with large bending molds.
For example, the parameters of the 800/6000 press brake are:
- Upper mold: 380mm
- Lower mold: 150mm
- Stroke: 400mm
The total adds up to: 380 + 150 + 400 = 930mm.
This indicates that this type of press brake is suitable for processing large or heavy workpieces and is capable of meeting the requirements of high demand scenarios.

3. Factors affecting maximum opening height
3.1 Mold height:
The maximum opening height must include the total height of the mold (upper die + lower die) and the travel distance of the up and down movement. Therefore, in the purchase of press brake, the height of the mold is the primary consideration, especially large press brake. Ensure that the total height of the mold is less than the maximum opening height to ensure that the equipment works properly.

3.2 Size of the workpiece:
For the case of processing box type workpiece, you need to pay special attention to the total height of the workpiece upright. If the height of the workpiece requires a higher mold, then the maximum opening height of the press brake also needs to be increased accordingly, in order to meet the mold height after the size requirements.
3.3 Safety margin:
The design of the maximum opening height needs to reserve a certain safety margin (usually 10-20%). This margin can effectively avoid the mold or workpiece interference caused by the operation of the problem, to ensure that even if you need to use the height of the mold, the equipment is still able to complete the normal processing task.
The Choice of Press Brake Model Recommendations
4.1 Selected according to the size of commonly used workpieces:
Priority is given to selecting a press brake model that can meet the processing needs of commonly used workpieces. In the case of the body conditions allow, try to choose the maximum opening height of the equipment is greater, so that the possible use of the future heightened mold space to improve the adaptability of the equipment.
4.2 Pay attention to the specific calculation of the maximum opening height:
Some manufacturers in the calculation of the maximum opening height will be the thickness of the table (usually about 100mm), resulting in the maximum opening height of the data appearing to be larger, but the actual use of space may be small. Therefore, when purchasing, you should carefully verify the calculation of the maximum opening height to ensure that the actual height available meets the needs.
4.3 Pay attention to the labeling of the “maximum opening height”:
Usually, manufacturers will mark the actual height available after deducting the safety margin. For example, the theoretical maximum opening height of a certain model of press brake is 500mm, but the labeled value may be 450mm because a safety margin of 50mm is retained. This design is to protect the safety of the equipment by preventing the user from running the cylinder to the bottom during use, causing the upper mold to press against the bottom of the lower mold slot.
With the above suggestions, you can more accurately choose the press brake model that suits your needs and avoid inconvenience and safety hazards in subsequent use.


